# \#root-4-lite

**URL:** https://rootcnc.discourse.group/tag/root-4-lite/4.md

[Latest](https://rootcnc.discourse.group/latest.md) · [Categories](https://rootcnc.discourse.group/categories.md) · [Tags](https://rootcnc.discourse.group/tags.md)

---

## [Guitar cnc advise](https://rootcnc.discourse.group/t/guitar-cnc-advise/214)

<div class="topic-metadata">

**Author:** [@JoostD](https://rootcnc.discourse.group/u/JoostD)\
**Replies:** 10\
**Last updated:** [5 March 2023 11:26 UTC](https://rootcnc.discourse.group/t/guitar-cnc-advise/214 "2023-03-05T11:26:55Z")

</div>

Hi, As a hobby I built guitars. And now I’m looking to build a cnc to help achieve more precise and repeatable results. The bed I’m looking for is about 80\*40/50cm big. Is a root 4 lite doable for this? What cnc would…

---

## [Overall machine footprint](https://rootcnc.discourse.group/t/overall-machine-footprint/255)

<div class="topic-metadata">

**Author:** [@Sparky](https://rootcnc.discourse.group/u/Sparky)\
**Replies:** 5\
**Last updated:** [27 October 2022 14:23 UTC](https://rootcnc.discourse.group/t/overall-machine-footprint/255 "2022-10-27T14:23:36Z")

</div>

Hey Guys, I have a CNC now but would like to build a Root Lite CNC. I have a table and enclosure and would like to build the largest unit I can in that footprint. When looking at the sizing guide it gives the work area …

---

## [Root 4 lite with T8 Lead Screw](https://rootcnc.discourse.group/t/root-4-lite-with-t8-lead-screw/207)

<div class="topic-metadata">

**Author:** [@fredsamarane](https://rootcnc.discourse.group/u/fredsamarane)\
**Replies:** 1\
**Last updated:** [25 May 2022 21:24 UTC](https://rootcnc.discourse.group/t/root-4-lite-with-t8-lead-screw/207 "2022-05-25T21:24:06Z")

</div>

It is possible to mount the Root 4 lite with T8 Lead Screw

---

## [HSMWorks / Fusion 360 CAM Post processor](https://rootcnc.discourse.group/t/hsmworks-fusion-360-cam-post-processor/52)

<div class="topic-metadata">

**Author:** [@sailorpete](https://rootcnc.discourse.group/u/sailorpete)\
**Replies:** 0\
**Last updated:** [6 April 2021 20:25 UTC](https://rootcnc.discourse.group/t/hsmworks-fusion-360-cam-post-processor/52 "2021-04-06T20:25:01Z")

</div>

Please see attached for the post processor I used for generating generic Gcode for use with Marlin. This Post Processor creates a generic Gcode which ignores any starting or end Gcode commands - this is purely movement …

---

## [Root 4 Lite - Coming Very Soon](https://rootcnc.discourse.group/t/root-4-lite-coming-very-soon/26)

<div class="topic-metadata">

**Author:** [@Pete](https://rootcnc.discourse.group/u/Pete)\
**Replies:** 0\
**Last updated:** [25 March 2021 23:13 UTC](https://rootcnc.discourse.group/t/root-4-lite-coming-very-soon/26 "2021-03-25T23:13:35Z")

</div>

Some of you might have seen on the Instagram this storey post: Watch our for more information about this build in early April! Small bit of Information: Ball screw variant/ upgrade of the R3 Lite CNC machine Balls s…