R3 - NEMA 23 - 60x60 (60BYGH301B) motor mount

Root 3 Advice
1

Hi there, I want to build the R3 and have 4 NEMA 23 60BYGH301B laying around but these measure 60x60.
Is there a motor mount STL file available?

Best regards,
Ard

2

Hey Ard,

I would recommend looking at the Root 4 machine for Nema 23s.

Is 60mm a standard Nema motor size?

I’ve had a quick look at it should work fine for the Y axis but the width might be an issue for the X & Z axis.

Here is the link to the STL files for a standard Nema23

3

Hey Pete,

Thanks a lot for your quick reply.

I will have a look at your R4 machine first.
Im not sure if my nema’s are standard but they are 60x60 (the bolt holes are in the correct location for your parts).
I already found a YouTube video to change the original R3 parts.

Best regards,
Ard

Verzonden vanuit Outlook voor iOS